Crack Pipe Muffler Bracket Vibration Solution



Refer to our guide below on how to stop rattling from the crack pipe bracket on your GT car.

PARTS REQUIRED:

2 Bolts McMaster Carr P#: 95735A221
6 Washers McMaster Carr P#: 91100A160
2 Nuts McMaster Carr P#: 3528N12

Note: Part Numbers link to McMaster website

Created by Eric Rosu                                                                                                   date: 5/26/2021

 

We've seen a couple of scenarios where GT3/GT3RS owners have reported the stock center muffler bracket top tabs resonate when the Crack Pipe is installed. Here's how to fix it:

1. Drill two holes through the muffler bracket in the positions shown below using a 3/8" drill bit.

2. Put two washers on the bolt and push the bolt through the bracket 

3. Put the third washer on the other side of the bracket and secure with nut.

4. Tighten bolts to secure to the bracket. Final torque to 30 nM.

 

A couple other tips to help extend the life of the 3" and 4.5" clamps:

Take a file and gently round the sharp edge of the lower tabs on the muffler bracket (where the clamp touches the bracket). This will reduce the likelihood the tabs will slice through the bracket.

Make sure to NOT over-tighten the clamps. It's very easy to do and dramatically reduces the life of the clamp. Torque should only be 5-8nm on both the 3" and 4.5" clamps.

991 AND 997 INCONEL MEGAPHONE CENTER MUFFLER DELETE "CRACK PIPE" EXHAUST

The only sound better than a Porsche is the sound of a Porsche that’s earned its racing stripes. That’s why we’ve designed the Crack Pipe — the ultimate, unbridled expression of Porsche’s Motorsport DNA (with a little help from Dundon Motorsports). If you want to seriously turn heads at the track when you fly by, this is the one for you. Fair warning — with no valves or mufflers, you’ll have a constant RSR scream that is LOUD. So we wouldn’t suggest taking grandma for a spin.

The Crack Pipe is Our Most Aggressive Exhaust!  

  • Fabricated with Inconel 625
  • Megaphones for enhanced wave strength (more power)
  • Full 3.5" X Pipe merge

Not for the faint of heart, this is LOUD, screams like an RSR at full throttle. There are countless videos on our social media pages (@dundon_motorsports on Instagram and Dundon Motorsports on YouTube!) showcasing the power and sound this exhaust can make. It never fails to put a smile on our customers' faces, and even elicits some trademarked Dundon Giggles.

Click here to get it on our website today

My Cart: 0 item(s)